{"product_id":"bob-smith-209","title":"Bob Smith 209 Finish-Cure 20-Minute 2-Part Epoxy 4.5oz","description":"\u003cp\u003eFinish-Cure 20-Minute 2-Part Epoxy 4.5oz\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bob Smith Industries","offers":[{"title":"Default Title","offer_id":42549485961398,"sku":"BSI209","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/2028\/7670\/files\/finish_cure.jpg?v=1738363256","url":"https:\/\/www.acshobbies.com\/products\/bob-smith-209","provider":"ACS Hobbies","version":"1.0","type":"link"}